Type in the global and VTY line 0 15 configuration mode commands that will only allow SSH connections using the local username admin and the password adminpass. (Assume the RSA keys have already been created for SSH.)

1. Type in the global and VTY line 0 15 configuration mode commands that will only allow SSH connections using the local username admin and the password adminpass. (Assume the RSA keys have already been created for SSH.)

2. Type the interface F0/1 commands that will prevent interface F0/1 from accepting traffic from a third MAC address on F0/1 while continuing to accept traffic from the first two MAC addresses.

3. Discuss the two parameters that can be tracked by a CBAC firewall for TCP traffic that cannot be tracked for UDP traffic

4. Explain in detail the authentication methods in the following command. Also discuss the circumstances that will cause the next authentication method in the list to be used.

 

aaa authentication login default group radius local enable

5. Assuming you have already entered the crypto isakmp policy 100 command in global configuration mode, type the remaining commands that will set the following policy parameters: data confidentiality = DES, data integrity = SHA, Diffie-Hellman = group 2, and authentication = shared key.

Click Here To Get More on This Topic......